.......... Animatronics in Motion
.......How To.....
Imagineering.....Introduction
Modification Steps
Enhancements
Applications
Schematic / Drawing
Hardware / Electronics
Modification Kits
Billy Bones Makeover
Main Menu
Resources
| INTRODUCTION | ||||
|
Project Modification |
Project Hardware |
||
| Billy
Bass Bones is a singing and talking fish prop that is designed
to look like a real fish skeleton, attached to a wall plaque.
When the start button or light sensor is triggered, Billy Bones
goes through a sequence of songs, talking and body movements.with
the tail and head moving up away from the background board as
Billy Bones sings and talk. The motion of the tail and head are
quite unique and make Billy Bones appear to be alive. For this modification, the factory sound board and the motion control board will be removed,, so that a user programmable simple system can be installed, allowing the user to record any sound as songs, voice and control the tail and head body motion together. |
(1) (2) (3) |
Remove factory sound Steps |
(1)
(2) (3) |
BPE Sound Board Electronics Hardware Modification Kits |
MODIFICATION - PROCESS Steps Description Visual 1 Remove the 6 screws on the back of the Prop
Remove the 6 screws on the back of the Prop
Remove the 6 screws on the back of the Prop
Remove the 6 screws on the back of the Prop
Click on image for close-up view2 Remove the 6 screws on the back of the Prop
Click on image for close-up view3 Remove the 6 screws on the back of the Prop
Click on image for close-up view4 Remove the 6 screws on the back of the Prop
Click on image for close-up view5 Remove the 6 screws on the back of the Prop
Click on image for close-up view6 Remove the 6 screws on the back of the Prop
Remove the 6 screws on the back of the Prop
Remove the 6 screws on the back of the Prop
Remove the 6 screws on the back of the Prop
Click on image for close-up view7 Additional Enhancements
< To Top of Page >
| ENHANCEMENTS | |||
| Description |
|
||
| Remove the
6 screws on the back of the Prop Remove the 6 screws on the back of the Prop Remove the 6 screws on the back of the Prop Remove the 6 screws on the back of the Prop |
 Click on image for close-up view |
||
| Enhancement Hardware | |||
APPLICATIONS Example Description Visual 1 Remove the 6 screws on the back of the Prop
Remove the 6 screws on the back of the Prop
Remove the 6 screws on the back of the Prop
Remove the 6 screws on the back of the Prop
Click on image for close-up view2 Remove the 6 screws on the back of the Prop
Click on image for close-up view
< To Top of Page >
SCHEMATIC / DRAWING
< To Top of Page >
